Tax included.
Why choose Garvee?
No-Hassle Returns


Warranty
Telescopic wheelchair ramp for steps, thresholds and entrances
The Garvee wheelchair ramp consists of two separately positionable aluminium rails and is designed for suitable steps, door thresholds, kerbs and similar height transitions.
Each ramp rail can be extended telescopically up to 1.83 m. After use, the two rails can be pushed back together and transported in the included carrying bag or stored more compactly.
Flexible solution for different heights and on the go
Adaptable to various transitions
The telescopic rails can be extended up to 1.83 m and adapted to different suitable steps, thresholds and kerb edges.
For wheelchairs and mobility scooters
According to the product information, the pair of ramps can support loads of up to 272 kg and is intended for suitable wheelchairs, scooters and similar mobility aids.
More compact for transport
After use, both aluminum rails can be pushed together and stored together in the supplied carrying bag.
Telescopic rails for different height transitions
The two ramp rails can be extended independently of each other and then adjusted to the same required length.
The ramps are designed for use with height differences of approximately 21.3 to 53.3 cm. However, height is not the only crucial factor: the actual ramp length, the available space, and the resulting gradient must also be compatible with the mobility aid being used.
Up to 1.83 m length per ramp rail
According to the product specifications, each of the two rails reaches a maximum length of up to 1.83 m.
Thanks to its telescopic design, the length can be adjusted to different operating situations. Both rails should be set to the same length and positioned parallel to each other before use.
Aluminum construction with a load capacity of up to 272 kg
The ramp rails are made of aluminum. A maximum load of up to 272 kg is specified for the pair of ramps used together.
Before use, the combined weight of the user and mobility aid, as well as the wheel width and track width, should be checked. The specified maximum load capacity must not be exceeded.
Anti-slip surface for better wheel contact
The driving surfaces have a structured, non-slip surface that supports contact between wheels and ramp rails.
However, the surface does not replace correct positioning. Both ramp rails must be aligned stably, parallel, and correctly matched to the track width of the mobility aid being used.
Rubber pads for the upper support area
The upper part of the ramp rails has rubber pads that support contact with the respective contact surface.
Before driving on them, check that both ramps are fully and stably in place and cannot shift during use.
Locking mechanisms for the set ramp length
According to the product information, the telescopic rails have locking elements made of stainless steel.
After setting the desired length, the locks must be fully engaged before the ramps are loaded.
For thresholds, steps and kerb edges
The two ramp rails can be used on suitable door thresholds, individual steps, kerb edges and similar height transitions.
Whether a particular location is suitable depends on factors such as height, ramp length, gradient, contact area, and available space. These factors should be checked before each use.
Transport and storage with carrying case
After use, the ramp rails can be telescopically pushed together for more compact storage.
According to the product information, a carrying case is included in the scope of delivery and makes it possible to transport or store both rails together.
Product Features
- Set of 2, consisting of two separate telescopic ramp rails.
- Maximum length per ramp rail: up to 1.83 m.
- Specified maximum load capacity of the ramp pair: up to 272 kg.
- Aluminum construction.
- Telescopic length adjustment.
- Slip-resistant driving surface.
- Stainless steel locking elements.
- Rubber pads in the upper contact area.
- Carrying bag for transport and storage included.
- Designed for use with suitable wheelchairs, mobility scooters and similar mobility aids.
Specifications
| Brand | Garvee |
| Product type | Telescopic wheelchair ramp |
| Set contents | 2 ramp rails |
| Max. length | 1.83 m per ramp rail |
| Load capacity | Up to 272 kg |
| material | aluminum |
| surface | Slip-resistant |
| construction | Telescopic |
| Locks | stainless steel |
| Scope of delivery | With carrying bag |
Note: Before each use, check the ramp length, gradient, total weight, wheel width, and track gauge. Position both rails parallel on a firm and load-bearing surface, fully engage them, and ensure the locking mechanisms are engaged before driving onto the ramp. Do not exceed the specified maximum load capacity of 272 kg.
Frequently Asked Questions

Garvee 1.8 m Aluminum Portable Wheelchair Ramp with Carrying Bag for Home and Outdoor Use, 272 kg Load Capacity, Non-Slip
Tax included.
Out of Stock
Item temporarily unavailable
we will notify you when your item is back in stock.
Why choose Garvee?
No-Hassle Returns


Warranty












